Contact Us

TEL: +86-592-6513826

WhatsApp:+86 13799597996
E-mail: michaelshlh@sohu.com
Address: Baofu Bldg., No.819 Hubin South Road, Siming District, Xiamen, China

Home > Knowledge > Content
Heat press machine use method
Dec 27, 2017

1, pull the pressure handle straight, so that the heating plate is fully open. Plug in the power, turn on the power switch, the indicator light; Note: Due to the high power of the machine, the machine must have a suitable solid grounding! ! !

2, Temperature regulation: Press "+" or "-" key to set the temperature, press "+" key to increase the temperature setting value, press "-" key to decrease the temperature setting value.

3, adjust the left side of the timer knob, adjusted to the appropriate time to 10 seconds (depending on the length of time depends on the material);

4, when the temperature reaches the set value, the machine will automatically enter the thermostat state;

5, the transfer of things such as clothes and flat on the stage in the press, and then stacked to the transfer of the picture, the pressure handle forced down; Note: The pressure can not be too large, otherwise it will cause the pressure handle deformation! Adjust the pressure beforehand.

6, time to buzzer ring, then the pressure handle on the lift, remove the transfer of things such as clothing, tear off the end of the paper.

7, baking metal plate temperature is generally 170-200 ℃, the time in 20-40 seconds; baked porcelain plate temperature is generally 200-220 ℃, the time is 120-150 seconds; baked fabric temperature is generally 120-140 ℃, Time is 5-10 seconds.

6.jpg

Previous: Heat transfer production process

Next: weak image on the transfer t shirt