Contact Us

TEL: +86-592-6513826

WhatsApp:+86 13799597996
E-mail: michaelshlh@sohu.com
Address: Baofu Bldg., No.819 Hubin South Road, Siming District, Xiamen, China

Home > Knowledge > Content
how to use a heat press transfer machine
Dec 06, 2017

Connected to the 110V plug, open the side of the machine power box power switch, power indicator light; (Note that the machine must have a solid protection of the ground)

According to the required fabric, the control panel to adjust to the required temperature and time;

Temperature setting: press the SET button once, then the temperature digital value above the display will always flash, press the plus or subtract key to set the temperature, set the press to return to the interface;

Time setting: press the SET button once, then the temperature digital value above the display will always flash, and then press the set button again, then the time above the display digital value will always flash, press the plus or reduce the key settings Time, set the time and then press the set button to return to the interface.

When the temperature rises to the specified set temperature, the clothes flat on the silica gel board, it is recommended to first ironing clothes, and then on the provisions of the Tang Hua paper (will have a pattern of the heat transfer paper posts in the clothes transfer Position), and then press the handle down until it is fully closed. (Note that the pressure can not exceed 30Kg, otherwise lead to deformation of the handle)

When the hot stamping work is completed, indicating the time countdown will be "0", the machine will send a brief alarm sound and the handle will automatically bounce and return to the original position (careful handle automatically pop up), hot stamping work End.

Hot stamping work after the end, need to immediately tear paper tear.


Previous: Characteristics of heat transfer machine

Next: introduction hot press heating method knowledge